Showing all 74 results
-
Manual and Electric Sander
14 - 62 -82P
Apparatus for forming spools and skeins of exact length. -
Manual and electric micrometers
142
Test for determining thickness in fabrics, paper, cardboard, leather, plastic films, etc.
ISO 3034, ISO 4648, UNE 57103, UNE 53213-2, UNE EN ISO 534, UNE-EN ISO 2589 and UNE-EN ISO 20344, etc. -
Geosynthetics Micrometer
145
Apparatus for determining the thickness of geosynthetic materials.
UNE-EN ISO 9863-1 -
Simple Dynamometer
151
Apparatus for performing tensile tests with manual flywheel drive. -
Electric dynamometer
180 - 182
Electrically driven apparatus for performing tensile tests -
Static charging equipment
200
Test for determining elongation in fabrics under constant low load.
STANDARD VW-PV3909 -
Torque meter
261 - 262 - 265 - 268
Test for determining the twist of single or twisted yarns by single or double untwisting. -
Porosimeter
284
For determining the resistance to water penetration in fabrics.
UNE 20811 and ISO 811 -
Patex Porosimeter
288
Equipment designed to determine the air permeability of paper and compact cardboard using the Gurley method
UNE 57066-3 -
Spray Test Device
289
Apparatus for testing the water penetrability of fabrics and skins -
Airflow Porosimeter
293
Apparatus for determining air permeability in fabrics, felts, and foams
UNE-EN ISO 9237 -
Simple abrasion tester or Crockmeter
302M - 302P
Testing the colorfastness of dyes on textiles
UNE 40029, EN-ISO 105-X12, Renault D451010, etc. -
Angrec device
328
Equipment designed to determine the unwrinkling capacity of a horizontally folded fabric sample by measuring the remaining angle of the wrinkle.
UNE-EN 22313 -
Escletometer
347
Bursting strength test on paper and cardboard
UNE-EN ISO2758 AND UNE-EN ISO2759. -
Disc Test Tube Cutter
364 -365
Apparatus for cutting samples of paper, cardboard, fabrics, and the like. -
Plegalt device
454
Equipment for testing the alternative bending of wires.
UNE 7469:1999, UNE 207015:2005 AND DIN 51211 -
Spring Testing Device
470
Manually operated equipment for testing tension and compression springs. -
Mini Compressometer
545
Test for determining compressive strength in corrugated cardboard and paper samples -
Incinerator Device
573
Test for determining the mineral load or ash content in paper, cardboard, fabrics, coal, etc. -
Pneumatic Shear
590
For the preparation of corrugated cardboard test tubes for ECT compression testing.
FEFCO Nº8, ISO 3037 DIN 53149, TAPPI T811, TAPPI T823 -
Foamflex Equipment
600
Equipment for conducting fatigue tests on different materials such as foams or rubbers, as well as on plastic parts or components, etc. -
Sole Flexometer
604
Equipment for determining flexural strength on complete floors.
UNE-EN 17707:2005 and UNE-EN ISO 20344:2005 -
Flexotest Equipment
607
Equipment for determining fatigue in flexible cellular polymeric materials by constant load indentation and constant deformation testing.
UNE-EN ISO 3385 -
Impact Device
627
Apparatus for determining the level of mechanical robustness by means of pendulum hammer impact testing on electrical and electrotechnical products.
EN 60068-2-75 and EN 50102 (Código IK) -
Charpy-Izod notcher
628
Equipment for notching plastic test specimens for Charpy and Izod tests.
UNE-EN ISO 3385 -
Impact Dynamometer
629 - 630 - 632 - 633
Equipment for notching plastic test specimens for Charpy and Izod tests. -
Emlatex Device
639
Apparatus for testing the mechanical stability of latex. -
Cutting Equipment
640
Test for determining the cut resistance of protective gloves.
EN 388 -
Impact Elasticity Tester
645 - 645D
Test for determining the rebound resilience of rubbers using the Schob pendulum
DIN 53512 -
ACA abrasimeter
655
Equipment for abrasion testing on elastomers
DIN 53.516 and UNE-EN ISO 12770 -
Martindale abrasion tester
656
Equipment for testing fabric abrasion
UNE-EN ISO 12947 -
Flexing Equipment
657
Equipment for determining the shear strength of plastic- or rubber-coated fabrics.
UNE-EN ISO 5981 -
Hardness Tester Support
673 - 675 - 676
Testing apparatus for determining the hardness of elastomers and plastics
DIN 53505, UNE-EN ISO 868 and ASTM D2240 -
Deflex Device
687
Equipment for determining the Vicat temperature or flexural strength of plastic materials.
UNE-EN ISO 75 and UNE-EN ISO 306 -
Test Tube Smoother
699
Equipment for cutting and smoothing cable insulation covers.
Appendix A of the standard UNE EN 60811-1-1 -
Pneumatic Sample Cutter
701_12 - 701_18
Equipment for preparing test specimens by die cutting materials such as elastomers, plastics, leather, paper and fabrics. -
Test Tube Milling Machine
702
Equipment for the preparation of mechanised test tubes in plastic materials. -
Fleximper device
727_4 - 727_6
Test for determining the dynamic impermeability and water penetration and absorption of leather used for footwear uppers.
UNE-EN ISO 5403 -
Solfreg device
730, 730-2
Test for determining the colour fastness to dry or wet rubbing and the abrasion resistance of leather.
UNE 59250, ISO 11640, IUF 450 and Veslic regulations. -
Pellflex tape measure (Bally type)
732
Test for determining the resistance to continuous bending of light leathers and their surface finish.
UNE-EN ISO 5402 and UNE-EN ISO 20344. -
Lastometer device
733 - 733E
Test for determining the extension and tensile strength of leather grain using the ball method.
UNE 59025, IUP-9 and ISO 3379. -
Glow Wire Equipment
740
Glow Wire Test.
UNE-EN 60695-2-10 -
Flame cabin 1 KW
742
Equipment for fire reaction testing of electrical and fiber optic cables. Vertical flame propagation resistance test for an individual insulated conductor or cable.
UNE-EN 60332-1-1 -
Flammability Cabin
743
Test for determining the combustion characteristics of automobile interior materials.
ISO 3795, UNE 26234, DIN 75200, PSA D45 1333 and FMV SS 302, etc. -
Drip test device
745 - 745E
For testing the reaction to fire of building materials. Drip test applicable to fusible materials (complementary test).
NF P92-505 ,UNE 23725 and E/ECE/TRANS/505 Anexo 7 -
Smoke Booth
747
Fire reaction test for construction materials. Electric burner test on flexible materials with a thickness less than or equal to 5 mm.
UNE 23723:1990 -
Epiradiator calibrator
748
Fire reaction test for construction materials. Epiradiator test applicable to rigid or similar materials (cladding materials) of any thickness and to flexible materials thicker than 5 mm.
UNE 23.721:1990. -
Cabin REFO
749
Fire reaction test for construction materials. Epiradiator test applicable to rigid or similar materials (cladding materials) of any thickness and to flexible materials thicker than 5 mm.
UNE 23.721:1990. -
Curtains Equipment
751
Fire performance testing of curtains and drapes. Measurement of flame spread from vertically oriented test specimens exposed to a large flame ignition source.
UNE-EN 13772, UNE-EN ISO 6940 and UNE-EN ISO 6941 -
Flammability Cabin
752
Test for determining the flammability of construction products when subjected to direct flame action.
UNE EN ISO 11925-2 -
Fume Extraction Booth
753
Equipment designed for smoke extraction in laboratory fire reaction tests on materials such as fabrics, plastics, foams, etc. -
Maximpact Device
760T
Impact test for plastic pipes. Test method for resistance to external shocks using the clock ball method. Test method for resistance to external shocks using the ladder method.
EN 744 , ISO 3127 and EN 1411 -
Dart Impact Device
761
Test for determining the impact resistance of plastic films by free-fall dart.
UNE 53219, ISO 7765-1 and ASTM D-1709 -
Aparato Plecond
767
Aparato Plecond para el ensayo de Flexión a bajas temperaturas de cable eléctrico.
UNE-EN 60811-1-4:1996 ap 8.1 y 8.2 -
Percond device
768
Percond apparatus for low-temperature impact testing of electrical cables.
UNE-EN 60811-1-4:1996 ap 8.5 -
Abrasion Tester Cable – Cable
770
Apparatus for abrasion of cable on cable.
PSA 9609503299, PSA ST 9690916499 and NF R 13-415 -
Cable Abrasion Tester
771
Test for determining abrasion resistance in electrical cables.
HD 605 S1/A2 -
Aparato Caflex
772
Caflex apparatus for electrical cable bending tests.
UNE21027-2:1998, UNE21031-2:1998 and NF C32-201-2. -
Caplast device
778
High-temperature pressure testing for insulation materials and electrical cable sheathing.
EN 60811-3-1 -
Double column bench-top testing machine
851-1
Desktop machine with double column, designed and built to work with a low-maintenance mechanical transmission system linked to Conus acquisition and control software available in two versions: Basic and Advanced. -
Bench-top and single-rail testing machine
851
Desktop, single-rail machine, designed and built to operate with a low-maintenance mechanical transmission system connected to Conus acquisition and control software, available in two versions: Basic and Advanced. -
Bench-top, double-column testing machine
853 - 854
Desktop machine with double column, designed and built to work with a low-maintenance mechanical transmission system linked to Conus acquisition and control software available in two versions: Basic and Advanced. -
Double column stand-up testing machine
855 - 856 - 857 - 858
Double-column, floor-standing testing machine, designed and built to work with a low-maintenance mechanical transmission system connected to Conus acquisition and control software, available in two versions: Basic and Advanced. -
Equipo de Impacto
Aparato de Impacto por caída libre. Sector: Plásticos y Elastómeros
UNE-EN 61386-1, UNE-EN 61386-24 y IEC60794-1-21 -
Banco de Fluencia
Equipo para determinar la fluencia a compresión a largo plazo.
EN1606 -
Equipo Costuras
Para determinar el comportamiento de las costuras en materiales textiles bajo solicitación dinámica. Sector: Textil
PSA-Peugeot-Citroën D452024 -
Cabina EN520
Equipo de Reacción al fuego para el ensayo de cohesión y transferencia térmica en placas de yeso.
EN 520 y método ME-B5-0021V7 -
Static load abrasometer
Equipment for testing the abrasion of coatings on sheet metal test pieces. -
Equipo Calor por Contacto
Equipo para la determinación de la transmisión de calor por contacto en ropa de protección. Sector: Textiles
ISO/FDIS 12127-1 -
Renault abrasion tester
Device for determining abrasion resistance.
Renault D44 1959 -
Scratch Test
Aparato para la determinación de la resistencia al rayado. Sector: Plásticos y Elastómeros / Pinturas
PV3952: 2002 y PV3974
